Details for a Few Representative Tables:

The AM-SX Series Treatment Tables offer a unique design which will work well in smaller areas in the clinic. This design has exceptional stability, full height adjustment and section mobility. The flexibility of these tables allows the patient to be placed in proper position to achieve maximum results with minimum effort.

Shown here: Model AM-SX4000 Treatment Table

All the AM-SX Series Treatment Tables have the following features:

• 4 total lock swivel casters
• 120-volt 60hz motors
• 400 lbs. capacity
• Footswitch control
• 1/2" firm density foam tops
• Radiused, seamless corners on upholstered components
• 34 oz Heavy-Duty handcrafted vinyl upholstery with Permablock3® bacterial protection

AM-SP Series Hi-Lo Treatment Tables

The unique design of the AM-SP Series brings the future to you today! Based on a single pedestal approach, the AM-SP Series offers solid stability and loads of leg room and maneuverability for the clinician along with luxurious comfort for the patient. The single pedestal is equipped with our one-step caster system and footswitch at no additional cost and offers a full 27" width top along with a 400 lb. lifting capacity. Because of its unique design, the AM-SP Series operates in a range of 24" from the floor to a maximum height of 35 1/2". It also elevates with no end shift, so it can be used in a smaller area, saving precious space in your office or treatment room.

Shown here: Model AM-SP300 Treatment Table

All the AM-SP Series Treatment Tables include the following features:

• 34 oz. Heavy-duty handcrafted vinyl upholstery with Permablock3® bacterial protection.
• 1-1/2" Firm density foam tops.
• Radiused, seamless corners on upholstered components.
• Top sections have welded steel support frames.
• Pivoting joints have hardened steel shoulder bolts with locking nuts to ensure years of trouble-free operation.
• Footswitch control.
• 400 lb. Lifting weight capacity to accommodate the larger patient.
• 110 volts, 60 Hz motor. (220 volts, 50 Hz available on special order).
• One-step caster system.

AM-Series Hi-Lo Treatment Tables

These treatment tables are what put Armedica on the map... strong, stylish and affordable. For the clinician, the AM-Series offers full height adjustment and section mobility so the patient can be placed in the proper position for maximum results with minimum effort. For the patient, comfort and easy access getting on and off the table.

Shown here: Model AM-550 Treatment Table

All AM-Series Treatment Tables share these features:

• 34 oz. Heavy-duty handcrafted vinyl upholstery with Permablock3® bacterial protection.
• 1-1/2" Firm density foam tops.
• Radiused, seamless corners on upholstered components.
• Top sections have welded steel support frames.
• Pivoting joints have hardened steel shoulder bolts with locking nuts to ensure years of trouble-free operation.
• Footswitch control.
• Power assisted caster system (unless noted otherwise).
• 110 volts, 60Hz motor (220 volts, 50 Hz available on special order).
• 400 lb. Lifting weight capacity (unless noted otherwise).

Also available: Steel Mat Tables, Wood Treatment Tables and Mat Platforms, Training Stairs, Balance Boards, and a variety of stools.